| Standard round tubing | Circular outer profile, usually with a circular bore. | Conveys liquids or gases through a continuous passage. | Fluid transfer, air lines, and peristaltic pump tubing when the material and dimensions meet the application requirements. | The circular shape is suited to general-purpose flow and connections; it does not provide the built-in locating, sealing, or mounting features possible with custom profiles. |
| D-shaped profile | One flat side and one curved side; may be solid or hollow. | Provides a defined flat surface for positioning, contact, or sealing. | Cushioning strips, edge seals, and components that must sit against a flat panel or surface. | The flat face helps orient or seat the profile; round tubing generally has no flat locating surface. |
| Oval or elliptical profile | Wider in one direction than the other; can be hollow or solid. | Fits shallow spaces or creates a wider contact area within a limited depth. | Low-clearance seals, cushions, and custom-fit components. | Its width-to-height proportions can be tailored to a space; round tubing has a circular footprint. |
| Rectangular or square profile | Four-sided outer shape, with a solid or hollow interior depending on the design. | Fills a defined channel or provides flat-sided contact and support. | Gaskets, spacers, protective strips, and components fitted into rectangular grooves. | Flat faces can match a channel or mounting surface more closely than a round profile; suitability for fluid flow depends on the bore design. |
| Multi-lumen profile | One extrusion containing two or more separate internal passages. | Keeps multiple routes together while maintaining separate channels. | Medical, laboratory, and equipment assemblies that require more than one isolated passage, subject to applicable material and regulatory requirements. | Multiple bores are integrated into one profile; standard single-bore tubing provides one passage per tube. |
| Hollow bulb or bulb-seal profile | A rounded hollow section connected to a base, stem, or mounting feature. | Compresses to form a resilient contact seal or cushioning surface. | Enclosure, door, and access-panel seals where the profile is designed to compress against a mating surface. | The hollow bulb is intended to deform under contact; standard tubing is primarily shaped as a conduit. |
| U-shaped or channel profile | A channel-shaped section with an open side, sometimes with flexible legs. | Fits over an edge or provides a protective, gripping, or sealing interface. | Edge protection, panel trim, and custom channel-mounted seals. | The open channel can engage an edge directly; round tubing does not have this edge-fitting geometry. |