| What it is | A three-phase distribution transformer installed in a ground-level, lockable enclosure on a concrete pad. It changes voltage between a utility or facility supply and downstream distribution equipment. | Often used for commercial, industrial, and multi-building distribution systems. |
| Meaning of UL Listed | The specific product has been evaluated by UL against applicable safety requirements for its intended use. A listing applies to the evaluated construction and conditions; it is not a blanket approval of every transformer of the same general type. | Check the product label, model identification, ratings, and certification information for the exact unit. |
| Three-phase operation | The transformer transfers energy between three-phase windings and normally supplies a three-phase output. It changes voltage; it does not convert a three-phase supply into a single-phase supply. | The winding connection determines available line-to-line and, where a neutral is provided, line-to-neutral voltages. |
| Voltage transformation | Primary and secondary voltage ratings are selected for the supply and loads. The actual ratio and available configurations vary by unit and application. | An illustrative configuration is 13.2 kV primary to 480Y/277 V secondary; confirm all ratings on the nameplate. |
| Common secondary systems | Common three-phase secondary configurations include grounded-wye systems, which can provide a neutral, and delta systems, whose available grounding and voltage arrangements depend on the design. | Examples include 208Y/120 V and 480Y/277 V; these are examples, not universal ratings. |
| Distribution path | Power typically arrives through medium-voltage cables, passes through the transformer windings, and leaves through low-voltage connections for switchgear, panels, or other distribution equipment. | Switching, protection, grounding, and cable arrangements depend on the installation design. |
| Enclosure and installation | The cabinet is designed for outdoor, ground-level installation and restricts access to energized parts. Required clearances, pad design, and access provisions are determined by applicable codes and utility or project requirements. | Follow the unit’s installation instructions and applicable electrical and fire-safety requirements. |
| Insulation and cooling | Pad-mounted distribution transformers may use liquid insulation and cooling or a dry-type design. The construction affects installation, maintenance, and application requirements. | Verify the insulating medium and any environmental or containment requirements for the specific installation. |
| Key nameplate data | The nameplate identifies the unit’s electrical ratings and connection details needed for selection and safe integration. | Review kVA, primary and secondary voltage, phase, frequency, winding connection, impedance, temperature rise, and applicable rating information. |
| Selection and safety | Correct selection requires matching the supply, load, fault-duty requirements, connection, environment, and installation constraints. Installation and servicing should be performed by qualified personnel. | Consult the unit documentation, applicable codes, and the authority having jurisdiction. |