| Autonomous Mobile Robot (AMR) | Mobile robot that can perceive its surroundings and plan or adjust routes using onboard sensors and software. | Moving totes, carts, components, and work-in-process between storage, production, and packing areas. | Travels along routes that can be changed dynamically; may reroute around obstacles when the system permits. | Flexible routes and workflows; often suitable for facilities where layouts or traffic patterns change. | Requires careful traffic planning, suitable floor conditions, charging arrangements, and integration with task-management systems. |
| Automated Guided Vehicle (AGV) | Mobile robot that follows a defined route or guidance system, such as floor markings, reflectors, wires, or mapped paths. | Repeatable transport of pallets, bins, or carts along established routes. | Typically follows a preconfigured path and may pause or stop when its route is obstructed. | Well suited to stable, repetitive transport flows with predictable pickup and drop-off points. | Route changes and blocked pathways can require operational adjustments or system reconfiguration. |
| Autonomous Forklift | Mobile material-handling vehicle with automated navigation and a lifting mechanism for palletized loads. | Picking up, transporting, and placing pallets; some systems also serve racks, conveyors, or production lines. | Moves through warehouse or factory aisles and uses sensing and positioning systems to approach loads and storage locations. | Combines pallet transport and lifting in one vehicle, reducing some routine forklift movements. | Needs suitable aisle widths, accurate load presentation, safety controls, and coordination with people and other vehicles. |
| Articulated Robotic Arm | Stationary manipulator with rotary joints; commonly classified by its joint arrangement and number of axes. | Machine tending, picking and placing, case packing, palletizing, and transferring parts between stations. | Moves its end effector through a three-dimensional work envelope around a fixed base. | Offers a broad working range and can handle varied movements with an appropriate end effector. | Reach, payload, cycle time, tooling, guarding, and the layout of nearby equipment must match the task. |
| SCARA Robot | Selective-compliance arm, usually designed for fast movement in a horizontal plane with vertical-axis motion. | Small-part transfer, component insertion, sorting, and assembly-line pick-and-place operations. | Works mainly within a horizontal workspace, with vertical movement for pickup and placement. | Can provide fast, repeatable handling for compact tasks arranged around a workstation. | Its working envelope and motion are less suited to tasks requiring broad, flexible three-dimensional reach. |
| Cartesian / Gantry Robot | Linear-axis robot that moves along two or three orthogonal axes; a gantry version is typically supported by an overhead frame. | Loading and unloading, palletizing, large-area pick-and-place, and moving products between fixed stations. | Moves in straight lines along X, Y, and, in many systems, Z axes. | Provides a predictable rectangular work area and can cover large spans when supported by an appropriate structure. | Requires space for rails or a frame and may be less adaptable to obstacles or irregular workspaces. |
| Collaborative Robot (Cobot) | Robot arm designed for applications where people and robots may share a workspace under a task-specific safety assessment. | Part loading, light assembly, bin picking, packing, and repetitive transfer tasks near human workstations. | Usually mounted at a workstation and programmed to perform a defined sequence; some applications use hand-guided setup. | Can be easier to redeploy between tasks than some fixed automation installations. | Collaborative design does not make every application inherently safe; risk assessment, tooling, speed, and workspace conditions matter. |