| Front splitter or lip | ABS plastic, polyurethane, fiberglass, or carbon-fiber composite | Check the lower bumper profile, mounting points, ground clearance, and whether the piece is supplied with installation hardware. | The first-generation 8U and second-generation F3 have different front-end shapes. F3 pre-facelift and facelift parts should not be assumed interchangeable. |
| Front bumper or grille trim | ABS plastic, polypropylene, or fiberglass | Confirm openings for parking sensors, cameras, headlamp washers, and any market-specific equipment. A replacement bumper may require sensor transfer or calibration. | Match the exact generation and front-end version. Standard Q3 components may have different dimensions or openings from RS Q3 components. |
| Side skirts | ABS plastic, polyurethane, fiberglass, or carbon-fiber composite | Verify the sill length, attachment points, and whether the kit is designed for factory side trim or requires drilling or adhesive. | Compare 8U and F3 fitment separately. Check facelift-specific details and the vehicle’s original side-sill configuration. |
| Rear diffuser or lower valance | ABS plastic, polypropylene, polyurethane, or carbon-fiber composite | Match the rear bumper contour and exhaust-outlet arrangement. Confirm whether the part replaces the lower valance or attaches over it. | Rear bumper designs differ between generations and may change with a facelift. Confirm the exact bumper version rather than relying on registration year alone. |
| Roof spoiler or rear spoiler extension | ABS plastic, fiberglass, or carbon-fiber composite | Check roof-edge shape, hatch clearance, mounting method, and whether the component is an extension or a complete replacement. | Confirm compatibility with the vehicle’s original roof spoiler and hatch design. Generation-specific fitment is important. |
| Wheel-arch extensions | ABS plastic, polyurethane, or fiberglass | Check arch profile, wheel and tire clearance, and whether the extensions cover or align with existing trim. Local rules may restrict changes to vehicle width. | Use parts designed for the correct body generation and arch trim. Verify clearance at full steering lock and suspension compression. |
| Complete exterior kit | Usually a combination of ABS or polyurethane components; some kits include fiberglass or carbon-fiber pieces | Request a complete contents list, installation instructions, fasteners, and confirmation of sensor, camera, and exhaust provisions. Unpainted parts may need test fitting and paint preparation. | RS Q3 generations include the 8U (approximately 2013–2018) and F3 (introduced from 2019). Verify production date and facelift version because year boundaries and specifications can vary by market. |