| 1. Define the exact material | Product name, source process, intended use, physical form, and grade. | Compare the specification sheet, sample, and purchase contract; clarify whether the material is for food, feed, industrial, or other use. | All documents describe the same material and intended application. Do not apply one product’s limits to a different by-product. |
| 2. Set measurable quality limits | Moisture, color or appearance, particle size or viscosity (as relevant), foreign matter, and key composition values. | Agree on a product-specific specification and test methods before ordering. Moisture, for example, can be measured by an appropriate validated method for the material. | Use written buyer limits and named test methods; there is no single universal moisture or purity limit for all yellow side products. |
| 3. Require batch-level test records | Lot or batch number, production date, test date, results, units, methods, and laboratory details. | Match the certificate of analysis (COA) to the shipment lot; confirm whether results are supplier-tested or independently tested. | The COA identifies the actual lot and reports results against the agreed specification, not just generic typical values. |
| 4. Assess contaminants by risk | Relevant microbiological, chemical, or physical hazards, based on material, source, processing, and intended use. | Review the hazard assessment and test plan. Depending on the material, risks may include pathogens, mycotoxins, pesticide residues, heavy metals, or foreign material. | Test against applicable destination-market requirements and agreed customer limits; avoid assuming every hazard applies to every product. |
| 5. Verify regulatory fit | Intended-use classification, facility registration or approval where required, labels, safety documents, and import documentation. | Check the rules for the destination and use. For example, EU feed materials may be subject to Regulation (EC) No 767/2009 and feed-hygiene rules under Regulation (EC) No 183/2005; US animal-food requirements may include 21 CFR Part 507. | Confirm applicability with the relevant authority or qualified regulatory adviser; requirements depend on product, use, and jurisdiction. |
| 6. Check traceability and handling | Origin, production site, lot coding, storage conditions, packaging type, and transport conditions. | Review traceability records and inspect packaging and vehicle or container condition at loading and receipt. | Each delivery can be linked to its production lot, and handling conditions match the product’s documented storage requirements. |
| 7. Approve a sample and define bulk controls | Representative pre-shipment sample, agreed sampling plan, shipment quantity, inspection timing, and non-conformance process. | Compare the approved sample with a representative shipment sample; document sample identification, seal numbers where used, and inspection results. | Contract terms specify retesting, rejection or corrective-action steps, and responsibility for costs if a lot fails agreed requirements. |