| 1. Flange Specification |
| Flange type | Weld neck (WN) | Identify the required type, such as weld neck, slip-on, blind, threaded, or socket weld. |
| Nominal pipe size | NPS 4 (DN 100) | State the nominal size and the dimensional system required. |
| Pressure class | ASME Class 150 | Specify the class or pressure designation required by the applicable flange standard. |
| Flange standard | ASME B16.5 | Name the governing dimensional standard and edition if the project specifies one. Confirm that the standard covers the requested size and type. |
| Facing | Raised face (RF) | Specify the facing type and any required surface-finish or gasket-contact requirements. |
| Bore / pipe schedule | Bore to match NPS 4, Schedule 40 pipe | For a weld-neck flange, provide the mating pipe outside diameter and wall thickness or schedule so the bore can be checked. |
| 2. Material and Service Conditions |
| Material specification | ASTM A105 carbon steel | State the required material specification and grade. For low-temperature service, identify the applicable low-temperature material requirement, such as ASTM A350 LF2, if specified by the design. |
| Design conditions | Design pressure and temperature to be confirmed by purchaser | Provide design pressure, design temperature, and applicable piping code. The supplier should not infer service suitability from pressure class alone. |
| Corrosion / service notes | Non-sour service; no special corrosion allowance stated | Identify sour service, corrosive media, special cleaning, impact testing, or other project-specific requirements where applicable. |
| 3. Quantity, Inspection, and Documentation |
| Quantity | 24 pieces | State the quantity and unit of measure. List separate quantities for each size, class, material, or facing. |
| Inspection requirements | Standard inspection; identify any purchaser or third-party inspection requirements | Specify required inspections, testing, hold points, witness points, or inspection plans. Do not assume additional testing unless stated. |
| Material documentation | Request material test reports with the quotation | State the required certificate type and traceability requirements, such as heat-number traceability, where required by the purchase specification. |
| Marking and traceability | Mark size, class, material, standard, and heat number as required | Provide project marking rules, identification format, and any restrictions on marking methods. |
| Coating and preservation | State whether temporary rust-preventive protection or a specified coating is required | Describe coating type, surface preparation, color, dry-film thickness, or preservation requirements if applicable. |
| 4. Commercial and Delivery Information |
| Delivery destination | City, region, country, and postal code to be supplied by purchaser | Provide the delivery address or nearest port so freight and delivery terms can be quoted accurately. |
| Required delivery date | State requested delivery date or required lead time | Ask the supplier to confirm availability, production lead time, and estimated dispatch date. |
| Quotation currency and validity | Request quotation in the purchasing currency and state the required validity period | Ask for unit price, extended price, quote validity, applicable taxes or duties, and any minimum-order conditions. |
| Delivery terms | Specify the requested Incoterms® rule and named place, if applicable | Use the current applicable Incoterms® edition and identify the exact named place for the quoted delivery term. |
| Quote response requested | Unit price, total price, lead time, packing details, exclusions, and deviations | Request a clear list of inclusions, exclusions, technical deviations, and any assumptions used to prepare the offer. |