| Best-fit production volume | 1–50 parts for fit, form, and early functional checks | About 10–200 parts when a molded appearance is needed before production tooling | Usually best suited to repeat production; economical volume depends on part and tooling costs | Ask for the recommended process and the volume assumptions behind the quote. |
| Typical first-part lead time | Several days to about 2 weeks | About 2–5 weeks, including master pattern and silicone mold preparation | About 6–12 weeks for tooling and initial sampling; complex tools may take longer | Request separate dates for design review, tooling, first article, approval, and shipment. |
| Indicative tooling or setup cost | Usually low setup cost; design preparation and finishing may be billed separately | Typically hundreds to a few thousand US dollars for silicone molds, depending on size and complexity | Often several thousand to tens of thousands of US dollars or more for a production mold | Confirm what is included, who owns the tooling, its expected life, and the cost of revisions. |
| Indicative unit-cost behavior | Higher per part; generally changes little with small quantity increases | Moderate per part; useful for limited runs but labor and casting materials affect price | Lower per part at suitable volumes, but tooling is a significant upfront cost | Compare piece price at your actual forecast quantities, not just the lowest quoted price. |
| Capacity questions | Ask about printer technology, build size, available materials, and finishing capacity. | Ask how many molds and casting shifts can be assigned to the project. | Ask about press tonnage, mold-size limits, available machine hours, and planned production slots. | Request demonstrated monthly capacity for a part of similar size and complexity, plus a capacity plan for demand peaks. |
| Material and performance | Material properties vary by printing process; confirm strength, heat, and surface requirements. | Cast resins can approximate some plastic properties but may not match production-resin performance. | Production thermoplastics are available in many grades; resin, color, texture, and additives affect cost and lead time. | Specify the resin or required properties, operating temperature, UV exposure, chemical contact, and any compliance needs. |
| Quality and engineering support | Check dimensional inspection, design feedback, and repeatability between builds. | Check consistency across molds, color matching, and inspection of cosmetic surfaces. | Check design-for-manufacturing review, first-article inspection, process controls, and defect handling. | Agree on critical dimensions, tolerances, cosmetic acceptance criteria, inspection records, and change control. |
| Total project cost to compare | Part price + design preparation + finishing + shipping + any redesigns | Master pattern + silicone molds + cast parts + finishing + replacement molds + shipping | Tooling + samples and revisions + production parts + inspection + packaging + freight and duties | Request an itemized quote at multiple quantities and include samples, tooling maintenance, packaging, freight, and payment terms. |
| Common schedule or cost risks | Unsupported geometry, finishing queues, and material limitations | Mold wear, hand-finishing time, and variation between cast parts | Tool changes, design revisions after tool cutting, resin availability, and production-slot delays | Ask which assumptions could change the quoted price or delivery date and how changes are approved. |