| Bluetooth Low Energy (BLE) | Often about 10–30 m indoors; can reach 100 m or more in favorable line-of-sight conditions. Walls and interference reduce range. | Radio technology does not determine sensing accuracy. Select the measurement element and calibration to meet the required tolerance. | Well suited to short-range links. Reliable operation depends on receiver placement, advertising interval, interference, and connection design. | Suitable for small readings and periodic updates; generally not intended for continuous high-volume data streaming. | Low power is possible, especially with infrequent transmissions. Usually requires a nearby phone, gateway, or compatible receiver. | Wearables, room-level monitoring, asset tags, and sensors collected by nearby devices. |
| Wi-Fi | Commonly around 20–50 m indoors per access point, with wide variation by building, band, and access-point placement. | Accuracy is set by the sensor and calibration, not by Wi-Fi. Check the sensor’s specified error across the intended temperature, humidity, or pressure range. | Can use existing network coverage, but congestion, access-point outages, and changes to network credentials can interrupt reporting. | High capacity and typically low latency on a healthy local network; practical for frequent readings and larger data transfers. | Usually higher energy use than low-power sensor networks. Requires Wi-Fi coverage and network credentials. | Powered devices, buildings with established Wi-Fi, and applications needing frequent updates or more data. |
| Zigbee or Thread | Often about 10–30 m indoors per radio link; mesh nodes can extend coverage when placement and routing are suitable. | Accuracy depends on the sensing element, installation, and calibration. A mesh network can deliver readings but cannot improve the sensor’s measurement tolerance. | Mesh routing can provide alternate paths, but performance depends on powered routers, network configuration, and radio interference. | Designed for modest sensor messages and periodic control or monitoring; not a first choice for large continuous data streams. | End devices can be low power. A compatible coordinator or border router is needed, and mesh coverage needs suitable relay nodes. | Home and building automation with multiple nearby sensors and a local mesh network. |
| LoRaWAN | Several kilometers can be achievable outdoors; urban obstructions commonly shorten coverage, while clear rural links may reach farther. A site survey is recommended. | The radio link does not define measurement accuracy. Specify the sensor’s accuracy, calibration interval, and environmental limits separately. | Long-range links can be affected by terrain, buildings, antenna placement, and gateway availability. Confirm coverage at the actual installation sites. | Best for small, intermittent messages. Low data rates and regional airtime or duty-cycle rules can limit message frequency and payload size. | Very low-power operation is possible with infrequent reporting. Requires a LoRaWAN gateway or service coverage and appropriate network configuration. | Distributed meters, agriculture, environmental monitoring, and remote sites sending small periodic readings. |
| Cellular IoT (such as LTE-M or NB-IoT) | Coverage depends on the operator, radio technology, building penetration, and local deployment; verify service at every installation location. | Measurement accuracy is determined by the sensing element and calibration, not by cellular connectivity. | Can connect remote devices without a local gateway, but service availability, network outages, SIM or subscription status, and antenna design matter. | Supports routine telemetry; LTE-M generally suits more responsive or mobile use, while NB-IoT is designed for small, infrequent messages. Actual performance varies by network. | Power use varies with coverage, transmission frequency, and device design. Requires a cellular modem and usually a data plan. | Remote assets, utility monitoring, and deployments where installing and maintaining local gateways is impractical. |