| 1 | Product Standards | Confirm that the proposed angle steel complies with the standard and edition specified in the purchase contract. Common references include GB/T 706 for hot-rolled section dimensions, EN 10056 for structural steel equal and unequal angles, and ASTM A36 for carbon structural steel material requirements. | Written standard and edition, product specification, and a sample inspection or test report. Check that the standard applies to the requested product and properties. | Critical |
| 2 | Dimensions and Tolerances | Compare leg lengths, thickness, length, and permitted tolerances against the drawing or applicable product standard. Specify equal-leg or unequal-leg angles and whether cut-to-length pieces are required. | Dimensioned product list, technical drawing, and inspection records showing measured values and the applicable tolerance limits. | Critical |
| 3 | Steel Grade and Chemistry | Match the requested grade and chemical composition to the relevant material specification. Do not assume that similar grade names from different standards are interchangeable. | Mill test certificate (MTC) identifying the heat number, grade, chemical analysis, and referenced standard. Verify traceability between the certificate and delivered material. | Critical |
| 4 | Mechanical Properties | Check the specified tensile strength, yield strength, elongation, and any required impact properties against the contract and material standard. | Test results linked to the heat or batch, with test methods and units stated. Request independent testing if required by the project or purchase terms. | Critical |
| 5 | Manufacturing Capability | Establish whether the supplier manufactures the product or trades it, and confirm that its available production route can meet the requested sizes, quantities, and delivery schedule. | Written description of the production and quality-control process, available size range, production plan, and clarification of any subcontracted operations. | High |
| 6 | Quality Management | Review how the supplier controls incoming materials, production checks, final inspection, nonconformities, and corrective actions. ISO 9001 is a quality-management-system standard; certification alone does not prove that a particular shipment conforms. | Current certificate details where applicable, certificate scope and validity, inspection plan, sample quality records, and the process for handling nonconforming products. | High |
| 7 | Surface Condition and Finish | Agree on acceptable surface condition, including rust, scale, dents, and edge damage. For coated or galvanized angles, define the coating requirements separately from the base-steel specification. | Written acceptance criteria, representative photos or samples, coating specification where applicable, and pre-shipment inspection findings. | High |
| 8 | Packaging and Identification | Check that bundles can be handled and transported safely and that product identification remains readable through shipment and receiving inspection. | Packaging plan stating bundle size, strapping or protection, marking details, and the information shown on bundle tags, such as size, grade, quantity, and heat or batch reference. | Medium |
| 9 | Delivery and Export Readiness | Confirm the production lead time, shipment terms, loading plan, port or delivery point, and responsibility for freight, insurance, and export documentation under the agreed Incoterms® rule. | Quotation with a named Incoterms® rule and place, production and shipping schedule, packing list format, and a list of documents supplied for the destination market. | High |
| 10 | Commercial Terms and Risk Controls | Compare the total landed cost rather than unit price alone. Clarify payment milestones, quantity tolerances, inspection rights, claims procedure, and remedies for specification or delivery issues. | Itemized quotation, signed technical specification, purchase contract, agreed inspection and claim terms, and a defined process for resolving discrepancies. | High |