| Profile 01 | Flat, figure-eight self-supporting drop cable | 1–2 fibers | Single-mode, commonly G.657.A1 or G.657.A2 | Two non-metallic strength members with a separate messenger section | Outdoor-grade PE; LSZH versions may be specified for indoor sections | Aerial access connections between a distribution point and a building | Applicable parts of the IEC 60794 series; fiber type per ITU-T G.657 |
| Profile 02 | Flat, non-metallic reinforced drop cable | 1–4 fibers | Single-mode, commonly G.657.A1 or G.657.A2 | Parallel FRP or other specified non-metallic rods | PE for outdoor use; LSZH for indoor-rated versions | Indoor routing, façade runs, and short access links where non-metallic reinforcement is specified | Applicable parts of the IEC 60794 series; fiber type per ITU-T G.657 |
| Profile 03 | Flat, metal-reinforced drop cable | 1–4 fibers | Single-mode, commonly G.657.A1 or G.657.A2 | Parallel steel wires or steel strength elements | Outdoor-grade PE or another jacket material specified for the installation | Aerial or exterior access routes where metallic reinforcement is permitted | Applicable parts of the IEC 60794 series; installation requirements depend on the project |
| Profile 04 | Round, compact access drop cable | 1–2 fibers | Single-mode, commonly G.657.A2 | Central or longitudinal non-metallic strength members | LSZH for specified indoor use; PE for outdoor use | Indoor pathways, apartment distribution, and short final connections | Applicable parts of the IEC 60794 series; fiber type per ITU-T G.657 |
| Profile 05 | Micro-duct drop cable | 2–12 fibers, depending on cable design | Single-mode, typically G.657.A1, G.657.A2, or G.652.D as specified | Strength members and compact core designed for the specified duct system | Jacket compound selected for the installation environment and duct requirements | Blown or pulled installation in compatible microduct systems | Applicable parts of the IEC 60794 series; confirm compatibility with the duct system |
| Profile 06 | Ribbon-based access drop cable | 4–12 fibers, depending on ribbon configuration | Single-mode fibers, with type selected for the network design | Longitudinal strength members around a compact ribbon core | Outdoor PE or indoor LSZH, as specified for the route | Higher-fiber-count access links where ribbon handling or mass-splicing is required | Applicable parts of the IEC 60794 series; fiber type per the project specification |
| Profile 07 | Armored flat drop cable | 1–4 fibers | Single-mode, commonly G.657.A1 or G.657.A2 | Strength members combined with a specified metallic armor layer | Outdoor-grade jacket selected for exposure and mechanical protection needs | Access routes requiring additional protection from crushing or external damage | Applicable parts of the IEC 60794 series; armor and route requirements are design-specific |
| Profile 08 | Dielectric self-supporting drop cable | 1–4 fibers | Single-mode, commonly G.657.A1 or G.657.A2 | All-dielectric strength elements; no metallic messenger | Outdoor-grade PE or another specified weather-resistant compound | Aerial routes where an all-dielectric cable construction is required | Applicable parts of the IEC 60794 series; aerial design must match project loading requirements |
| Profile 09 | Indoor/outdoor transition drop cable | 1–4 fibers | Single-mode, commonly G.657.A2 for compact routing | Non-metallic or metallic strength elements, depending on the specified design | Jacket selected for the intended indoor/outdoor application and fire-safety requirements | Continuous routes that transition from an exterior entry point to indoor termination | Applicable parts of the IEC 60794 series; indoor fire performance must be separately specified |
| Profile 10 | Multi-fiber flat access drop cable | 4–12 fibers | Single-mode; G.657 or G.652.D options depend on the network design | Parallel strength members sized for the cable construction | PE for outdoor use or LSZH for specified indoor applications | Multi-subscriber distribution or access links needing more fibers in one cable | Applicable parts of the IEC 60794 series; fiber type per ITU-T G.652 or G.657 |