| 1 | Product engineering and kinematic design | Can design the linkage, pivot locations, and mounting geometry around the required opening angle, door thickness, and installation space. | Dimensioned drawings, 3D models, installation instructions, and prototype evaluation records. | A nominal 180° opening depends on the hinge design and the door, frame, and cabinet geometry; the installed assembly must be checked for clearance and interference. |
| 2 | Material and process selection | Selects materials and processes appropriate to the intended load, environment, cost, and hinge geometry, such as formed steel or cast components where suitable. | Material specifications, supplier certificates where applicable, and documented incoming-material checks. | Material choice affects strength, wear, corrosion behavior, manufacturability, and the hinge’s expected service conditions. |
| 3 | Precision machining and forming | Controls critical hole locations, pivot features, formed angles, and mating surfaces through suitable machining, stamping, or forming operations. | Critical-dimension inspection plans, measurement records, and samples from production runs. | Dimensional consistency supports smooth movement, reliable alignment, and repeatable installation. |
| 4 | Tooling and production repeatability | Maintains and controls production tooling, fixtures, and work instructions, with a defined process for managing tool wear and revisions. | Tool-maintenance records, revision-controlled drawings, and first-piece or setup inspection results. | Repeatable tooling helps keep hinge geometry consistent across batches and replacement orders. |
| 5 | Assembly and joint control | Controls pin, rivet, fastener, and linkage assembly operations and checks for looseness, binding, and inconsistent movement. | Assembly work instructions, inspection criteria, and functional-check records. | The assembled linkage determines how smoothly the hinge opens and closes and whether its parts remain securely joined. |
| 6 | Load and durability validation | Tests the hinge or installed assembly against defined load and cycling conditions relevant to the intended application. | Test reports stating the sample configuration, load, cycle method, acceptance criteria, and results. | Performance depends on door size, mass, mounting, and use. A test result is meaningful when its conditions are clearly stated. |
| 7 | Corrosion and finish control | Uses a finish suited to the application and monitors coating coverage, appearance, and process consistency. | Finish specification and, when relevant, corrosion-test reports identifying the method and exposure conditions, such as ISO 9227 salt-spray testing. | Corrosion resistance varies with base material, coating, environment, and test conditions; results should not be compared without those details. |
| 8 | Quality management and traceability | Documents inspection, nonconformance handling, corrective action, and batch identification throughout production. | Quality-system documentation, relevant certification scope, inspection records, and lot-traceability examples. | Traceability makes it easier to investigate defects and verify that corrective actions address their cause. |
| 9 | Customization and production flexibility | Can assess requested changes to dimensions, mounting patterns, finishes, or packaging and identify their tooling and validation requirements. | Engineering-change procedure, approved samples, and written confirmation of specifications and tolerances. | Clear change control reduces the risk of mismatched mounting dimensions or unverified design changes. |
| 10 | Capacity planning and delivery control | Plans production, inspection, and packaging against confirmed order requirements and communicates constraints before shipment. | Production schedule, order-status process, packaging specification, and shipment inspection records. | Production capability includes delivering conforming parts consistently, not only making a successful prototype. |