| Nonwoven topsheet | Air permeability | ASTM D737; report pressure differential and test area | 320 ft³/min/ft² at 125 Pa | Compare topsheet samples tested under the same conditions. Higher airflow alone does not establish comfort or overall product quality. |
| Nonwoven topsheet | Grab tensile strength, machine direction (MD) | ASTM D5034, where suitable for the material; report specimen direction and conditioning | 38 N | Indicates resistance to pulling in the MD under the specified grab-test setup; it is not a direct measure of softness. |
| Nonwoven topsheet | Grab tensile strength, cross direction (CD) | ASTM D5034, where suitable for the material; report specimen direction and conditioning | 25 N | Compare CD results with samples of the same construction. Differences between MD and CD can reflect material orientation. |
| Breathable film or backsheet laminate | Air permeability | ASTM D737, if the specimen and instrument setup are appropriate | 18 ft³/min/ft² at 125 Pa | A low or near-zero result may be expected for some barrier constructions. Airflow should be considered alongside leakage-barrier requirements. |
| Breathable film or backsheet laminate | Grab tensile strength, MD | ASTM D5034, subject to specimen suitability; identify whether the film is tested alone or as a laminate | 52 N | The tested construction must be stated because film-only and laminate results are not directly interchangeable. |
| Breathable film or backsheet laminate | Grab tensile strength, CD | ASTM D5034, subject to specimen suitability; identify whether the film is tested alone or as a laminate | 41 N | Use the same specimen preparation, direction, and test settings when comparing bids or production lots. |
| Finished panty liner | Whole-product suitability for air-permeability or grab testing | Confirm specimen geometry and method applicability with the laboratory before applying ASTM D737 or ASTM D5034 | Not assigned | A finished product may be too small, layered, or irregular for a standard specimen setup. Component testing may be more appropriate. |