| General-purpose braided PVC hose | Flexible PVC tube with one or more textile-braid reinforcement layers and a PVC cover. | Compressed-air lines, water transfer, light-duty pneumatic equipment, and general plant service when the conveyed material is compatible with PVC. | Designed for positive pressure; the braid improves pressure handling compared with an unreinforced tube. It is generally not intended for sustained vacuum service. | Check working pressure at the actual operating temperature, hose inside diameter, fitting compatibility, and whether the application involves pressure surges or repeated flexing. | Pressure capacity decreases as temperature rises and can be affected by pulsation, kinking, abrasion, and chemical exposure. Do not use for breathing air unless specifically certified for that purpose. |
| PVC suction and delivery hose | Flexible PVC wall with a rigid PVC helix or spiral reinforcement to help resist collapse. | Water, slurry, powders, and other compatible materials in applications involving suction, discharge, or both. | The helix helps maintain the hose shape under vacuum, while the hose wall and construction also determine its positive-pressure capability. | Match vacuum rating, bend radius, hose diameter, conveyed-material abrasiveness, and the required end connections. Confirm that the selected hose is rated for the full vacuum level. | Vacuum resistance can fall sharply if the hose is bent too tightly, heated, worn, or operated beyond its specified vacuum rating. It is not suitable for every solvent or chemical. |
| PVC layflat discharge hose | Flexible PVC tube reinforced with textile yarns; the hose flattens when depressurized and expands during flow. | Water discharge, irrigation, drainage, and temporary transfer where compact storage and quick deployment are useful. | Primarily used for positive-pressure discharge. It is not a vacuum hose and should not be used for suction unless the manufacturer specifically rates it for that service. | Consider working pressure, pump surge, abrasion at ground contact, coupling retention, and whether the hose must withstand outdoor exposure. | Can kink or twist if incorrectly laid out. Pressure ratings depend on construction and temperature; protect it from sharp edges and prolonged contact with incompatible materials. |
| Steel-wire helix PVC hose | PVC wall reinforced with a rigid steel-wire helix, sometimes combined with textile reinforcement. | Industrial suction and transfer where increased shape retention is needed, including some liquid, granule, or powder handling duties. | The wire helix supports vacuum resistance; positive-pressure capability varies by design and must be checked separately. | Review the specified vacuum and pressure ratings, grounding or bonding requirements where relevant, minimum bend radius, and resistance of the lining to the conveyed material. | The reinforcement can be damaged by crushing or excessive bending. Steel wire may corrode if exposed through a damaged cover or used in an unsuitable environment. |
| Food-contact PVC hose | Food-contact-grade PVC formulation, commonly with textile reinforcement for pressure service; some designs are transparent for visual flow checks. | Food or beverage transfer only when the complete hose assembly is certified for the intended food type, contact conditions, and jurisdiction. | Pressure performance depends on the reinforcement and product design; food-contact status alone does not indicate a pressure or vacuum rating. | Verify applicable food-contact documentation, temperature and cleaning limits, product compatibility, and whether the hose is approved for the specific beverage or process. | Not every PVC hose is food-grade. Cleaning chemicals, repeated hot-water exposure, and operating conditions beyond the stated limits can affect service life and compliance. |
| Chemical-transfer PVC hose | PVC tube with reinforcement selected for the intended pressure or suction duty; formulations and liners vary by product. | Transfer of specifically listed acids, alkalis, salts, or other chemicals under the conditions stated by the hose manufacturer. | Pressure and vacuum capability depend on the exact construction. Chemical compatibility does not establish a pressure rating. | Check compatibility against the exact chemical, concentration, temperature, exposure duration, and cleaning procedure. Confirm the hose, fittings, seals, and assembly are all suitable. | PVC is not universally resistant to solvents, oils, or aggressive chemicals. Do not select by generic chemical category alone; consult a compatibility chart and the manufacturer. |
| Unreinforced PVC tubing | Single-wall flexible or semi-rigid PVC tube without textile or helix reinforcement. | Low-pressure, low-demand routing such as drainage, protective sleeving, and compatible low-pressure fluid or air lines. | Offers limited pressure capability compared with reinforced hose and is generally unsuitable for vacuum service. | Check tube wall thickness, temperature range, bend radius, fluid compatibility, and whether the application requires a specified pressure rating. | More prone to kinking, expansion, and collapse than reinforced constructions. Avoid using it for high-pressure, impulse, or safety-critical service unless specifically rated. |