| Lens pitch (LPI) | The number of lenticules per inch in the lens sheet. Common commercial pitches include roughly 20–100 LPI, depending on sheet type and application. | The pitch determines how image strips align with the lenses. A mismatch can cause ghosting, softness, or incorrect image transitions. | Use the measured or supplier-specified pitch for the exact sheet and printing setup. Do not assume sheets with the same nominal LPI are identical. |
| Lens material and thickness | Lenses are commonly made from clear plastics such as PETG, PET, or acrylic. Sheet thickness and lens geometry vary by product. | Optical clarity, surface uniformity, and consistent lens geometry affect sharpness and the stability of the 3D effect. | Choose a sheet suited to the intended viewing distance and use. Keep the lens surface clean and avoid scratches, warping, or uneven pressure. |
| Image resolution and interlacing | Interlacing divides multiple views into narrow strips sized and positioned to work with the lens pitch. File requirements depend on the lens, output size, and print workflow. | Insufficient source detail or incorrect interlacing can make transitions look jagged, blurred, or visibly separated. | Prepare the final-size artwork using the correct lens profile and output specifications. Check effective resolution at the final print size rather than relying only on a file’s pixel dimensions. |
| Number and spacing of views | A 3D file combines a sequence of images captured or rendered from slightly different viewpoints. More views can create smoother motion parallax but leave less image information for each view at a fixed output resolution. | Poorly spaced views may produce uneven depth, image jumps, or excessive blur between viewing positions. | Use a consistent camera step and a moderate depth range. Select the view count to suit the lens pitch, print size, and intended viewing zone. |
| Viewing angle and distance | The lens design and interlaced image define the range of angles over which the views change. Viewing distance influences how the effect is perceived. | An unsuitable viewing position can make the image appear unstable, reduce the depth effect, or reveal adjacent views. | Design and proof the piece for its expected use—for example, handheld viewing or a wall display—and test it from typical angles and distances. |
| Lens-to-image registration | Registration is the alignment of the interlaced print with the lenticules, including alignment of lens direction and image-strip orientation. | Even a small alignment error can cause crosstalk, ghosting, or the wrong views appearing at particular angles. | Follow the production method’s alignment procedure. Confirm orientation and alignment with a physical proof before producing the full run. |
| Print method and ink | Printing may be applied directly to a compatible lens sheet or to a separate substrate that is then assembled with the lens. | Ink spread, drying, adhesion, color consistency, and substrate compatibility can affect detail and appearance through the lens. | Use materials and inks specified for the chosen process. Evaluate color and fine detail through the finished lens, not only on a flat proof. |
| Image content and depth range | The foreground-to-background separation and differences between views determine how strongly depth is perceived. | Excessive depth, abrupt cutouts, or inconsistent subject placement can create visual discomfort and distracting edge artifacts. | Keep depth transitions controlled, use clean subject edges, and avoid placing important details across areas that shift sharply between views. |
| Lighting and reflections | Ambient light, viewing angle, and reflections from the lens surface influence how clearly the printed image can be seen. | Glare can reduce perceived contrast and obscure fine detail, even when the print and alignment are accurate. | Assess proofs under representative lighting. Consider display placement and reflections when selecting the finish and installation angle. |